Baltimore City · 21231

408 S EDEN ST

Property watching is a Pro feature. Join the waitlist to get new permits, violations, and inspections on this property in a daily email digest.

Already have Pro access? Sign in.

Total assessment: $93,200
Land use: Residential (R)
Year built: 1870
Last sale: Oct 2, 1986

This owner holds 6 Baltimore City properties (Pro feature — join the waitlist).

Assessment

Owner	BOLLINGER, MARK G
Land use	Residential (R)
Total assessment	$93,200 (cycle 2026)
Last sale	Oct 2, 1986 — $25,000
Year built	1870
Zoning	R-8
Vacant	—

Permits

Type	Description	Cost	Issued
USE2019	use as a single family dwelling	—	Nov 27, 2019
COM2019	reinstatement: (original permit:com2018-69496:scope of work: exterior work: addition of a 7'10" x 10' rearward addition to align with neighboring rearmost wall. (4) new windows, no doors. enlarged kitchen and above den as plans as per code. no openings should be created less than 5' from property lines per planning dept: this structure is in a high risk flood zone, where the expected base flood elevation is 8.76 feet navd88, based on baltimore city cross section data. the city also requires an additional 2 feet of flood protection. therefore, the flood protection elevation is 10.76 feet navd88. also, the natural grade of this structure is approx 6 feet navd88. therfore, the following flood protections must be in place in the area which is 5 feet from the top of the entire first floor: 1) wall, doors, windows, and partitions must be made of water resistant materials such as pressure treated wood or vinyl 2) dry wall must be flood resistant for example non paper faced gypsum board or water-resistant, fiber-reinforced gypsum exterior sheathing. additionally, this project triggers substantial improvement; its cost exceed 50% of the fair market value of the structure. therefore, its lowest floor must be elevated above the flood protection elevation (both existing and new structure). obviously, this is not reasonable as the structure is a row home attached on both sides. therefore, the applicant must treat the space below the flood protection elevation as an enclosure suitable for storage, building access, or parking only. the enclosure shall contain flood openings to allow for automatic entry and exit of flood waters during a design flood event.engineered openings shall meet the following installation criteria: 1. each enclosed area shall have a minimum of two openings, 2. openings shall be in at least two walls of each enclosed area, 3. the bottom of each opening shall be no more than 1 ft above the higher of the final interior grade or floor and the finished exterior grade immediately under each opening, and 4. openings meeting requirements of section 2.7.2.1 or section 2.7.2.2 that are installed in doors and windows are permitted. a finished construction elevation certificate must be submitted before a use and occupancy permit is approved.) original permit description:(com2018-69496) scope of work: exterior work: addition of a 7'10" x 10' rearward addition to align with neighboring rearmost wall. (4) new windows, no doors. enlarged kitchen and above den as plans as per code. no openings should be created less than 5' from property lines per planning dept: this structure is in a high risk flood zone, where the expected base flood elevation is 8.76 feet navd88, based on baltimore city cross section data. the city also requires an additional 2 feet of flood protection. therefore, the flood protection elevation is 10.76 feet navd88. also, the natural grade of this structure is approx 6 feet navd88. therfore, the following flood protections must b	—	Nov 21, 2019
COM2019	reinstate original permit.(original permit:com2018-74850:the property is located within the 500 year floodplain where the flood protection elevation is 9.4 feet navd88. this means any improvement below 9.4 feet is subject to floodplain regulations. the natural grade at this structure is 6 feet; therefore, improvements within 3.4 feet off the ground must have the following: the electric water heater must be anchored securely to resist being dislodged during an intense flood, the sanitary connection and water service must have back flow prevention, the furnace must have a float detected automatic shut off device to prevent gas from leaking if the furnace is disconnected from the gas line during an intense flood event. install (1) # electric water heater, (9) # plumbing fixtures, (1) # sanitary connection, new interior, (1) # water service pipe (reconstruction), (1) # water service pipe, new interior, (1) # sanitary connection, new interior, (1) 48000 btu fuel-burning equip, (1) 70000 btu fuel-burning equip as per code. apwc per planning: the property is located within the 500 year floodplain where the flood protection elevation is 9.4 feet navd88. this means any improvement below 9.4 feet is subject to floodplain regulations. the natural grade at this structure is 6 feet; therefore, improvements within 3.4 feet off the ground must have the following: the electric water heater must be anchored securely to resist being dislodged during an intense flood, the sanitary connection and water service must have back flow prevention, the furnace must have a float detected automatic shut off device to prevent gas from leaking if the furnace is disconnected from the gas line during an intense flood event.) original permit description:(com2018-74850) the property is located within the 500 year floodplain where the flood protection elevation is 9.4 feet navd88. this means any improvement below 9.4 feet is subject to floodplain regulations. the natural grade at this structure is 6 feet; therefore, improvements within 3.4 feet off the ground must have the following: the electric water heater must be anchored securely to resist being dislodged during an intense flood, the sanitary connection and water service must have back flow prevention, the furnace must have a float detected automatic shut off device to prevent gas from leaking if the furnace is disconnected from the gas line during an intense flood event. install (1) # electric water heater, (9) # plumbing fixtures, (1) # sanitary connection, new interior, (1) # water service pipe (reconstruction), (1) # water service pipe, new interior, (1) # sanitary connection, new interior, (1) 48000 btu fuel-burning equip, (1) 70000 btu fuel-burning equip as per code. apwc per planning: the property is located within the 500 year floodplain where the flood protection elevation is 9.4 feet navd88. this means any improvement below 9.4 feet is subject to floodplain regulations. the natural grade at this	—	Nov 19, 2019
COM2019	reinstate original permit.(original permit:com2019-79505:reinstate original permit.(original permit:com2019-50681:install (1) # new distribution system (1-2 family), (1) 24000 btu air-con system, condensor, (1) 60000 btu fuel-burning equip as per code.) original permit description:(com2019-50681) install (1) # new distribution system (1-2 family), (1) 24000 btu air-con system, condensor, (1) 60000 btu fuel-burning equip as per code.) original permit description:(com2019-79505) reinstate original permit.(original permit:com2019-50681:install (1) # new distribution system (1-2 family), (1) 24000 btu air-con system, condensor, (1) 60000 btu fuel-burning equip as per code.) original permit description:(com2019-50681) install (1) # new distribution system (1-2 family), (1) 24000 btu air-con system, condensor, (1) 60000 btu fuel-burning equip as per code.	—	Nov 7, 2019
COM2019	reinstate original permit.(original permit:com2018-69496:scope of work: exterior work: addition of a 7'10" x 10' rearward addition to align with neighboring rearmost wall. (4) new windows, no doors. enlarged kitchen and above den as plans as per code. no openings should be created less than 5' from property lines per planning dept: this structure is in a high risk flood zone, where the expected base flood elevation is 8.76 feet navd88, based on baltimore city cross section data. the city also requires an additional 2 feet of flood protection. therefore, the flood protection elevation is 10.76 feet navd88. also, the natural grade of this structure is approx 6 feet navd88. therfore, the following flood protections must be in place in the area which is 5 feet from the top of the entire first floor: 1) wall, doors, windows, and partitions must be made of water resistant materials such as pressure treated wood or vinyl 2) dry wall must be flood resistant for example non paper faced gypsum board or water-resistant, fiber-reinforced gypsum exterior sheathing. additionally, this project triggers substantial improvement; its cost exceed 50% of the fair market value of the structure. therefore, its lowest floor must be elevated above the flood protection elevation (both existing and new structure). obviously, this is not reasonable as the structure is a row home attached on both sides. therefore, the applicant must treat the space below the flood protection elevation as an enclosure suitable for storage, building access, or parking only. the enclosure shall contain flood openings to allow for automatic entry and exit of flood waters during a design flood event.engineered openings shall meet the following installation criteria: 1. each enclosed area shall have a minimum of two openings, 2. openings shall be in at least two walls of each enclosed area, 3. the bottom of each opening shall be no more than 1 ft above the higher of the final interior grade or floor and the finished exterior grade immediately under each opening, and 4. openings meeting requirements of section 2.7.2.1 or section 2.7.2.2 that are installed in doors and windows are permitted. a finished construction elevation certificate must be submitted before a use and occupancy permit is approved.) original permit description:(com2018-69496) scope of work: exterior work: addition of a 7'10" x 10' rearward addition to align with neighboring rearmost wall. (4) new windows, no doors. enlarged kitchen and above den as plans as per code. no openings should be created less than 5' from property lines per planning dept: this structure is in a high risk flood zone, where the expected base flood elevation is 8.76 feet navd88, based on baltimore city cross section data. the city also requires an additional 2 feet of flood protection. therefore, the flood protection elevation is 10.76 feet navd88. also, the natural grade of this structure is approx 6 feet navd88. therfore, the following flood protect	—	Oct 4, 2019
COM2019	reinstate original permit.(original permit:com2019-50681:install (1) # new distribution system (1-2 family), (1) 24000 btu air-con system, condensor, (1) 60000 btu fuel-burning equip as per code.) original permit description:(com2019-50681) install (1) # new distribution system (1-2 family), (1) 24000 btu air-con system, condensor, (1) 60000 btu fuel-burning equip as per code.	—	Oct 2, 2019
COM2019	reinstate original permit.(original permit:com2018-74850:the property is located within the 500 year floodplain where the flood protection elevation is 9.4 feet navd88. this means any improvement below 9.4 feet is subject to floodplain regulations. the natural grade at this structure is 6 feet; therefore, improvements within 3.4 feet off the ground must have the following: the electric water heater must be anchored securely to resist being dislodged during an intense flood, the sanitary connection and water service must have back flow prevention, the furnace must have a float detected automatic shut off device to prevent gas from leaking if the furnace is disconnected from the gas line during an intense flood event. install (1) # electric water heater, (9) # plumbing fixtures, (1) # sanitary connection, new interior, (1) # water service pipe (reconstruction), (1) # water service pipe, new interior, (1) # sanitary connection, new interior, (1) 48000 btu fuel-burning equip, (1) 70000 btu fuel-burning equip as per code. apwc per planning: the property is located within the 500 year floodplain where the flood protection elevation is 9.4 feet navd88. this means any improvement below 9.4 feet is subject to floodplain regulations. the natural grade at this structure is 6 feet; therefore, improvements within 3.4 feet off the ground must have the following: the electric water heater must be anchored securely to resist being dislodged during an intense flood, the sanitary connection and water service must have back flow prevention, the furnace must have a float detected automatic shut off device to prevent gas from leaking if the furnace is disconnected from the gas line during an intense flood event.) original permit description:(com2018-74850) the property is located within the 500 year floodplain where the flood protection elevation is 9.4 feet navd88. this means any improvement below 9.4 feet is subject to floodplain regulations. the natural grade at this structure is 6 feet; therefore, improvements within 3.4 feet off the ground must have the following: the electric water heater must be anchored securely to resist being dislodged during an intense flood, the sanitary connection and water service must have back flow prevention, the furnace must have a float detected automatic shut off device to prevent gas from leaking if the furnace is disconnected from the gas line during an intense flood event. install (1) # electric water heater, (9) # plumbing fixtures, (1) # sanitary connection, new interior, (1) # water service pipe (reconstruction), (1) # water service pipe, new interior, (1) # sanitary connection, new interior, (1) 48000 btu fuel-burning equip, (1) 70000 btu fuel-burning equip as per code. apwc per planning: the property is located within the 500 year floodplain where the flood protection elevation is 9.4 feet navd88. this means any improvement below 9.4 feet is subject to floodplain regulations. the natural grade at this	—	Oct 1, 2019
COM2019	reinstate original permit.(original permit:com2019-51366:install (16) # branch circuits/feeders , (1) 200 amps electric service up to 600v (#amps), (12) # low voltage as per code.) original permit description:(com2019-51366) install (16) # branch circuits/feeders , (1) 200 amps electric service up to 600v (#amps), (12) # low voltage as per code.	—	Oct 1, 2019
COM2019	reinstate original permit.(original permit:com2018-69496:scope of work: exterior work: addition of a 7'10" x 10' rearward addition to align with neighboring rearmost wall. (4) new windows, no doors. enlarged kitchen and above den as plans as per code. no openings should be created less than 5' from property lines per planning dept: this structure is in a high risk flood zone, where the expected base flood elevation is 8.76 feet navd88, based on baltimore city cross section data. the city also requires an additional 2 feet of flood protection. therefore, the flood protection elevation is 10.76 feet navd88. also, the natural grade of this structure is approx 6 feet navd88. therfore, the following flood protections must be in place in the area which is 5 feet from the top of the entire first floor: 1) wall, doors, windows, and partitions must be made of water resistant materials such as pressure treated wood or vinyl 2) dry wall must be flood resistant for example non paper faced gypsum board or water-resistant, fiber-reinforced gypsum exterior sheathing. additionally, this project triggers substantial improvement; its cost exceed 50% of the fair market value of the structure. therefore, its lowest floor must be elevated above the flood protection elevation (both existing and new structure). obviously, this is not reasonable as the structure is a row home attached on both sides. therefore, the applicant must treat the space below the flood protection elevation as an enclosure suitable for storage, building access, or parking only. the enclosure shall contain flood openings to allow for automatic entry and exit of flood waters during a design flood event.engineered openings shall meet the following installation criteria: 1. each enclosed area shall have a minimum of two openings, 2. openings shall be in at least two walls of each enclosed area, 3. the bottom of each opening shall be no more than 1 ft above the higher of the final interior grade or floor and the finished exterior grade immediately under each opening, and 4. openings meeting requirements of section 2.7.2.1 or section 2.7.2.2 that are installed in doors and windows are permitted. a finished construction elevation certificate must be submitted before a use and occupancy permit is approved.)	—	May 17, 2019
COM2019	install (1) # new distribution system (1-2 family), (1) 24000 btu air-con system, condensor, (1) 60000 btu fuel-burning equip as per code.	$9,500	Jan 18, 2019
COM2019	install (16) # branch circuits/feeders , (1) 200 amps electric service up to 600v (#amps), (12) # low voltage as per code.	$8,500	Jan 16, 2019

Violations

Kind	Category	Status	Fine	Balance	Date
service_request	HCD-Illegal Dumping	Closed	—	—	Apr 25, 2026
citation	PM 306.2	O	$50	$50	Apr 16, 2026

Inspections

No inspections on record.

Nearby recent activity

Records marked with * are matched by address, not a direct account link. Data is informational only.

Data freshness: city-311: 2026-07-12; city-ecb-citations: 2026-07-12; city-housing-inspections: 2026-07-12; city-permits: 2026-07-12; city-real-property: 2026-07-12; city-vbn: 2026-07-12; county-permits: 2026-07-12; sdat-properties: 2026-07-12;

Official sources: Maryland SDAT, Baltimore City permits.